For Safe Servicing; Warning Symbols - Takeuchi TB 175 Handbuch

1. For Safe Servicing

Most accidents are caused by negligence of basic safety rules and precautions. For accident prevention,
it is important to avoid such causes before development to accidents.
Please read this manual carefully before starting repair or maintenance to fully understand safety
precautions and appropriate inspection and maintenance procedures.
Attempting at a repair or maintenance job without sufficient knowledge may cause an unexpected
accident.
It is impossible to cover every possible danger in repair or maintenance in the manual. Sufficient
consideration for safety is required in addition to the matters marked CAUTION. Especially for safety
precautions in a repair or maintenance job not described in this manual, receive instructions from a
knowledgeable leader.

1.1. Warning Symbols

Safety marks used in this manual and their meanings are as follows:
Any matter marked [NOTICE] in this manual is especially important in servicing.
If not observed, the product performance and quality may not be guaranteed.
DANGER indicates an imminently hazardous situation,
which if not avoided, WILL result in death or serious injury.
WARNING indicates a potentially hazardous situation,
which if not avoided, COULD result in death or serious
injury.
CAUTION indicates a potentially hazardous situation,
which if not avoided, may result in minor or moderate
injury.
1