Definition Of Terms - Takeuchi TB 175 Handbuch

• Contents omitted in this manual
Though the following jobs are omitted in the explanation in this manual, they should be conducted in actual
work:
3)Jacking up and lifting
4)Cleaning and washing of removed parts as required
5)Visual inspection

(3) Definition of Terms

[NOTICE]: Instruction whose negligence is very likely to cause an accident. Always observe it.
Standard: Allowable range for inspection and adjustment.
Limit: The maximum or minimum value that must be satisfied during inspection or adjustment.
(4) Abbreviations
Abbreviation
Assy
Sub-Assy
a.T.D.C
b.T.D.C before top dead center
STD
IN
EX
Meaning
assembly
sub-assembly
after top dead center
Standard
Intake
Exhaust
Abbreviation
T.D.C.
B.D.C. bottom dead center
OS
US
-1
revolutions per minute
Min
PS Output (metric horsepower)
T Bolt/nut tightening torque
Meaning
top dead center
oversize
undersize