Fasten the thermo-element.
Tightening Torque : 30-35 N-m
I
nstall the joint, (C.W), and he plug, (C.W.)
Assemble the seal washers, taking care not the washer
stride over steps. (One seal washer is required for
respective upper and lower portions.)
Fasten the plug, (C.W.)
Install the joint, (overflow) and the joint, (overflow).
Install the joint, (FO inlet).
Installation position of Joints
Direction of pipe depends on respective specifications.
38
F.O. valbe
return pipe
F.O. outlet
Cooling water
F.O. inlet