Figure 78: Begin Purge For Pressure Calibration Check - Hologic Fluentpro Bedienungsanleitung

6.1.2.5
6.1.2.6
6.1.2.7
76
Fluent Pro Fluid Management System
Press 'NEXT STEPS' to continue setup including placement of the container and opening
the Fluid Bag Clamps.
Figure 77: Pressure Calibration Check Steps, Part 2
Press 'NEXT' to perform pressure check.
Follow prompts and press 'START PURGE' to start the purge of air.

Figure 78: Begin Purge for Pressure Calibration Check

Supplementary Information English