Figure 47: Change Scope Screen - Hologic Fluentpro Bedienungsanleitung

3.5.4 Using the MyoSure Tissue Removal Device (TRD) During a Procedure (When Applicable).
3.5.4.1
3.5.4.2
3.5.4.3
3.5.4.4
3.5.5 Using the MyoSure Tissue Removal Device (TRD) in MyoSure Only mode.
3.5.5.1
3.5.5.2
3.5.5.3
3.5.6 Changing the Hysteroscope During a Procedure.
3.5.6.1
English
Fluent Pro Fluid Management System
Introduce the TRD though the working channel of the hysteroscope.
After pressing the 'RUN' icon to start the procedure, press the Foot Pedal to activate the
MyoSure TRD cutting blade. Ensure the foot pedal is placed in a location that is accessible to
the physician.
The MyoSure TRD cannot be operated when the Fluent Pro Fluid Management System is
paused.
Refer to the MyoSure TRD Instructions for Use for more information on how to use the
MyoSure TRD.
After entering MyoSure Only mode from the Settings screen, the fluid management system
is disabled and only MyoSure control is enabled, and the foot pedal can be used to operate
the MyoSure TRD.
Refer to the MyoSure tissue removal device Instructions for Use for more information on
how to use the MyoSure TRD.
To exit MyoSure Only mode select the 'END' icon and follow the prompts.
Touch the 'CHANGE/REPRIME' icon. The system will pause, and the System tab will
display the Reprime and Change Scope Confirmation screen.

Figure 47: Change Scope Screen

During Procedure 39