Setup System; Setup Screen; Figure 14: Settings Screen - Hologic Fluentpro Bedienungsanleitung

Settings:
2.6.2

Figure 14: Settings Screen

To choose the display language: Touch the 'LANGUAGE' icon and select your language.
•
To adjust the display brightness: Touch the Down '(-)' or Up '(+)' icons to increase or decrease
•
brightness.
To adjust the speaker volume for alerts: Touch the Down '(-)' or Up '(+)' icons to increase or
•
decrease alert volume.
To perform Pressure Calibration: Select the Pressure Calibration 'CHECK' icon to launch the
•
Pressure Calibration check. Refer to Section 6.1.2 for details.
To perform Scale Calibration: Select Scale Calibration 'CHECK' icon to launch the Scale
•
Calibration check. Refer to Section 6.1.1 for details.
To enter MyoSure Only Mode: Touch the 'MYOSURE ONLY MODE' icon to launch into MyoSure
•
Only Mode. Refer to Section 3.5.5 for details.
• Service Mode: This function is password protected and is intended for Hologic Trained
professionals only. To enter Service Mode, touch the 'SERVICE MODE' icon.
For details on the setup and operation of the hysteroscope, refer to the hysteroscope's Instructions for
Use.

Setup System

2.7

Setup Screen

2.7.1
2.7.1.1
18
Fluent Pro Fluid Management System
From the Launch screen, touch the 'BEGIN SETUP' icon. The Setup screen is displayed.
Procedure Setup English