Last Procedure Data; Figure 51: Recovering Fluid Screen - Hologic Fluentpro Bedienungsanleitung

3.6.4 The system displays a screen to notify that the system is recovering fluid.

Figure 51: Recovering Fluid Screen

3.6.5 The Fluent Pro Out-FloPak will continue to evacuate fluid to ensure an accurate deficit value and all
resected tissue is captured.
Do not remove the Fluent Pro Out-FloPak and Waste Bag if you want to allow suction to continue to
run to remove excess fluid from the Under-Buttocks Drape (UBD) to accurately reflect the deficit. If the
Fluid Bag or Waste Bag are removed at this time, the deficit will need to be calculated manually.
3.6.6 When you feel the excess fluid has been removed from the Under-Buttocks Drape (UBD), touch the
'DONE' icon.
3.6.7 The system displays a Procedure Complete screen that displays the following final procedure data:
• Fluid Deficit
• Total Fluid In
Cutting Time
•
To exit the Procedure Complete screen, perform the following steps:
3.6.8
3.6.8.1
3.6.8.2
3.6.9 Once FloPaks have been removed from the system, the 'EXIT' icon will be activated.
3.6.10 Select 'EXIT'. The Launch screen will be displayed, allowing you to begin a new procedure or to
access the last procedure data.
3.6.11 For specifics on disassembly and disposal see Section 4.1.
Note: If you forget to record the results at the end of the procedure, the Fluent Pro Fluid Management
System will retain the results from the last procedure. See below for details on how to view last
procedure data.

Last Procedure Data

3.7
3.7.1 To access data from the last procedure, prior to starting a new procedure, perform the following steps:
42
Fluent Pro Fluid Management System
WARNING!
Retrieve Tissue Trap (specimen).
Remove disposables.
During Procedure English