How To Reprime; Connecting The Myosure Tissue Device (Trd); Figure 42: Procedure Screen; Figure 43: Reprime Screen - Hologic Fluentpro Bedienungsanleitung

2.7.8.5

How to Reprime

2.7.9
2.7.9.1
2.7.9.2
2.7.9.3
2.7.9.4
2.7.9.5
2.7.9.6
2.7.9.7

Connecting the MyoSure Tissue Device (TRD)

2.7.10
If setting up the MyoSure TRD, refer to Section 3.5.
32
Fluent Pro Fluid Management System
Select the 'NEXT' icon. The Procedure screen will be displayed.

Figure 42: Procedure Screen

Touch the 'CHANGE/REPRIME' icon. The system will pause, and the System Tab will
display the Reprime and Change Scope Confirmation screen.

Figure 43: Reprime Screen

Touch the 'REPRIME' icon. The Reprime screen will appear.
Direct reprime fluid the Under-Buttocks Drape (UBD).
Prime should be performed at the operative height.
WARNING!
Do not prime inside the patient.
Follow the prompts and touch the 'PRIME' icon.
When the reprime is complete, the Priming Complete screen will be displayed.
Touch the 'NEXT' icon to continue.
Procedure Setup English