Install In-Flopak; Figure 24A: Depress In-Flopak Lever; Figure 24B: Slide In-Flopak Over Shaft; Figure 25: Clamp Tubing And Spike Fluid Bag - Hologic Fluentpro Bedienungsanleitung

Install In-FloPak

2.7.5
For your own safety and that of your patient, use only Fluent Pro accessories referenced in Table 9:
Disposables and Accessories.
2.7.5.1

Figure 24a: Depress In-FloPak Lever

2.7.5.2
2.7.5.3
English
Fluent Pro Fluid Management System
WARNING!
Depress the In-FloPak Lever and slide the In-FloPak over the triangular shaft. While
releasing the Lever, ensure the In-FloPak is flush with front of the console. The system will
detect and display a '
been properly installed.
Clamp tubing and spike the Fluid Bag.

Figure 25: Clamp Tubing and Spike Fluid Bag

Connect the blue inflow luer connector to the hysteroscope inflow channel.
DETECTED' icon on the Setup screen when the In-FloPak has

Figure 24b: Slide In-FloPak Over Shaft

Procedure Setup 23