Locking The Wheels; Turning On The Fluent Pro Fluid Management System; Configure System Settings (Required For Initial Setup); Figure 12: Lock Wheels - Hologic Fluentpro Bedienungsanleitung

positioning or cause a tripping hazard.
To avoid the risk of electric shock, this equipment must only be connected to a supply mains with
protective earth.
Ensure the available wall outlet voltage matches the data listed on the label attached to the rear of the
system. Incorrect voltage can cause errors and malfunctions and may damage the system.
For more information about Power Cord safety, see Section 6.3 Power Cord Safety.

Locking the Wheels

2.4
To lock the wheels, use your foot to push down on the outer lever of each Wheel Lock.

Figure 12: Lock Wheels

Turning on the Fluent Pro Fluid Management System

2.5
Press the Power Button on the top of the system to power on the system. The system performs a setup routine
and then displays the System Launch screen. The Power Button will illuminate green when the system is on.

Figure 13a: Power Button

Configure System Settings (Required for Initial Setup)

2.6
2.6.1 To configure the system settings, touch the 'SETTINGS' icon. The Settings screen is displayed.
English
Fluent Pro Fluid Management System
WARNING!
Caution!

Figure 13b: Launch Screen

Procedure Setup 17