Installation And Assembly; Ambient Conditions For Operation; Scope Of Delivery; Installation - Prominent Dulcopool Pro Montage- Und Betriebsanleitung

Installation and assembly

4 Installation and assembly

4.1 Ambient Conditions for Operation

4.2 Scope of Delivery

Description
Assembled device
Cable connection set DMTa/DXMa (metr.)
Operating instructions

4.3 Installation

4.3.1 Wall mounting

16
User qualification, mechanical installation: trained and qualified
n
Ä Chapter 2.4 'User qualification' on page 14
personnel
User qualification, electrical installation: electrical technician
n
Ä Chapter 2.4 'User qualification' on page 14
Ambient conditions for operation
Temperature: 0 °C ... + 50 °C
n
Air humidity: < 90 % relative air humidity (non-condensing)
n
The controller may not be installed in hazardous environments or
in places where it could be exposed to spraying water or chemi‐
cals. The installation site must be dry, well ventilated and free of
corrosive gases.
Select an installation site without vibrations, on a suitable base sur‐
face without deformations.
Protect the controller from rain, frost and direct sunlight.
The following components are included as standard with a con‐
troller.
User qualification, mechanical installation: trained and qualified
n
Ä Chapter 2.4 'User qualification' on page 14
personnel
User qualification, electrical installation: electrical technician
n
Ä Chapter 2.4 'User qualification' on page 14
Remember to disconnect the controller from the power supply
before undertaking installation and electrical wiring.
The prerequisite for protection class IP65 is that the terminal cover
and transparent cover of the controller are sealed. Select and cor‐
rectly seal cable openings according to the diameters of the
cables.
Mounting materials (contained in the scope of delivery)
1 x wall bracket
n
4 x PT screws 5 x 35 mm
n
Quantity
1
1
1