Replacing The Internal Fuse - Prominent Dulcopool Pro Montage- Und Betriebsanleitung

Installation and assembly
X1, power supply, 100 ... 230 V AC
Tab. 5: X1, power supply, 100 ... 230 V AC
Power supply
4.3.2.5 Connecting the terminals
Fig. 13: Stripping back the cable
sleeve

4.3.3 Replacing the internal fuse

26
Fig. 12: X1, power supply, 100 ... 230 V AC
53
54
55
There is also a field containing connection information next to the
terminals on the modules.
1. Strip the sleeve from the end of the cable as shown in Fig. 13
and press on the corresponding cable end sleeves.
2. To install the cables, push the screwdriver supplied right into
the square opening of the respective terminal to insert the
cable end into the terminal block.
3. Connect the cables according to the wiring diagram.
4. Check the cabling against the wiring diagram.
A0508
User qualification, replacing the internal fuse: electrical technician
Ä Chapter 2.4 'User qualification' on page 14
L1
N
PE
A3863