Wall mounting
4 x washers 5.3
n
4 x rawl plug Ø 8 mm, plastic
n
Take the wall bracket out of the housing
Fig. 3: Removing the wall bracket
1.
Pull the two snap hooks (1) outwards
ð The wall brackets snaps slightly downwards.
2.
Push the wall bracket downwards (2) from the housing and
fold (3) it out
3.
Use the wall bracket as a drilling template to mark the posi‐
tions of four drill holes
4.
Drill the holes: Ø 8 mm, d = 50 mm
Installation and assembly
A0490
17