Setting Measuring And Control Parameters; Set Up' Programming Screen - Prominent Dulcopool Pro Montage- Und Betriebsanleitung

8

Setting measuring and control parameters

'SET UP' programming screen

8.1
Setting measuring and control parameters
User qualification, setting measuring and control parameters:
n
Ä Chapter 2.4 'User qualification' on page 14
trained user
General menu
Menu
User
Software version: X.XX
Serial number: 2047000815
Fig. 74: Start screen for programming
If an access code has been set up to lock the
menu, then the two keys also have a small padlock symbol.
1. Press the menu you wish to access to open the password
entry window.
2. Enter the 4-digit user code. Confirm the entry with the tick
key to access the 'SET' or 'SET UP' menu
You can access and change the entire configuration for initial use
of your controller via the
menu' to open the following screen.
Configuration and setting
Options Inputs
Outputs Conditions
Fig. 75: Menu: Configuration and setting
'Options' menu lets you access the options
Options The
available in the installation part.
'Inputs' menu lets you access the options avail‐
Inputs The
able in the installation part.
Timer The 'Timer' menu lets you access the options avail‐
able in the installation part.
Menu
Set
'SET' or 'SET UP'
'SET UP' menu. Press the 'SET UP
Timer
Communication
Menu
Set-up
A3087
measurements
Calculating
Factory
setting
A3088
87