Threshold Value' Metering Mode - Prominent Dulcopool Pro Montage- Und Betriebsanleitung

Setting measuring and control parameters

'Threshold value' metering mode

8.2.4
106
I.
II.
III.
Fig. 105: 'Active threshold' 90 %.
I. Metering requirement parameter.
II. No metering time count.
III. Metering time count.
IV. Reset time to 0.
'Active threshold' 90 %: Enter the capacity from which the
metering time is counted. Here the
cally set to (90) according to the metering mode.
Setpoint and control settings
E01 pH value
Upper threshold
Lower threshold
Fig. 106: 'Threshold value' metering mode
90 %
IV.
'Active threshold' is automati‐
Threshold value mode
Basic load
Maximum time
Active threshold
A3149
A3150