Tektronix DC 5010 Anleitung Seite 81

Operating Instructions-DC 501 0
Slew Rate Measurements
Slew Rate measurements can be made using a combina-
tion of the RASE and MIN?; MAX? commands. The RISE
-
command measures the risetime between the 10% and 90%
points. The signal level difference between the 10% and
9O0/ 0 points is then calculated using the results returned for
the MIN? and MAX? query commands. Using the signal lev-
el difference and risetime values, the slew rate is
determined.
Additional assistance in developing specific application
oriented software is available in the following Tektronix
manuals.
070-3985-00-GPIB Programming Guide. This man-
ual is specifically written for applications of this in-
strument in IEEE-488 systems. It contains pro-
gramming instructions, tips and some specific
example programs.
070-2270-00-4051 GPlB Hardware Support Man-
ual. This manual gives an indepth discussion of
IEEE-488 bus operation, explanations of bus timing
details and early bus interface circuitry.
070-2058-01 -Programming In BASIC
070-2059-01 -Graphic Programming In BASIC
062-5971 -01 -4050-Series Programming Aids, T1
(includes software)
062-5972-01 -4050-Series Programming Aids, T2
(includes software)
070-2380-01 -4907 File Manager Operators manual
070-21 28-00-4924 Users manual
070-1 940-01 -4050 Series Graphic System
Operators manual
070-2056-01 -4050 Series Graphic System
Reference manual
070-391 8-00-4041 Operators manual
061 -2546-00-4041 Programming Reference
manual