Tektronix DC 5010 Anleitung Seite 64

Operating Instructions-DC 501 0
SEND
Type:
Output
Syntax:
SEND
Output Examples:
45.1 375501 9E
+
6; (Frequency)
3.001 8E-6; (Period)
01 ; (Pro becomp)
395; (Test)
1 977249.; (Totalize)
Discussion:
The SEND command formats available data for output.
Data is available when a completed measurement result has
not previously been output. If no data is available the SEND
command causes the DC 501 0 to wait for the current mea-
surement to complete and then formats the result.
SEND
SETTINGS
Type:
Query
Syntax:
SET?
SETTINGS?
Response:
cfunction>;CHA A;ATT cnum>;COU xx;SLO xx;
TERM xx;LEV cnum>;CHA B;ATT cnum>;COU xx;
SLO xx;TERM xx;LEV tnum>;AVE tnunn>;OPC xx;
OVER xx;PRE xx;FIL xx;NULL xx;DT xx; USER xx; RQS
xx;
Example Response:
FREQ A;CHA A;ATT 1 ;COU DC;SLO P0S;TEiRM HI;
LEV 1.500;CHA B;ATT 5;COU AC;SLO NEG;TERM LO;
LEV -5.000;AVE -1 ;OPC 0FF;OVER 0N;PRE OFF;
FIL 0FF;NULL 0FF:DT 0FF;USER 0FF;RQS ON;
Discussion:
The SETTINGS query returns the current settings of the
instrument.
The SETTINGS query response may then be used at a
later time to reset the instrument back to those settings.
SETTINGS