Tektronix DC 5010 Anleitung Seite 8

The general safety information in this part of the summary is
for both operating and servicing personnel. Specific
warnings and cautions will be found throughout the manual
where they apply, but may not appear in this summary.
TERMS
In This Manual
CAUTION statements identify conditions or practices that
could result in damage to the equipment or other property.
WARNING statements identify conditions or practices that
could result in personal injury or loss of life.
As Marked on Equipment
CAUTION indicates a personal injury hazard not immediate-
ly accessible as one reads the marking, or a hazard to prop-
erty including the equipment itself.
DANGER indicates a personal injury hazard immediately ac-
cessible as one reads the marking.
SYMBOLS
In This Manual
This symbol indicates where applicable cau-
tionary or other information is to be found.
As Marked on Equipment
DANGER
-
High voltage.
@
Protective ground (earth) terminal.
ATTENTION
-
refer to manual.
Power Source
This product is intended to operate from a power module
whose power source will not apply more than 250 volts rms
between the supply conductors or between either supply
conductor and ground. A protective ground connection by
way of the grounding conductor in the power cord is essen-
tial for safe operation.
Grounding the Product
This product is grounded through the grounding conductor
of the power module power cord. To avoid electrical shock,
plug the mainframe power cord into a properly wired recep-
tacle before connecting to the product input or output termi-
nals. A protective ground connection by way of the
grounding conductor in the power cord is essential for safe
operation.
Danger Arising From Loss of Ground
Upon loss of the protective-ground connection, all accessi-
ble conductive parts (including knobs and controls that may
appear to be insulating) can render an electric: shock. ----
Use the Proper Fuse
To avoid fire hazard, use only the fuse of correct type, volt-
age rating and current rating as specified in the parts list for
your product.
Refer fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmosphe!res
To avoid explosion, do not operate this product in an explo-
sive atmosphere unless it has been specifically certified for
such operation.
Do Not Operate Without Covers
To avoid personal injury, do not operate this product with-
out covers or panels installed. Do not apply power to the
plug-in via a plug-in extender.
ADD DEC 1982