Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
...notes on using VCR's and camcorders through AV input
The AV Setup screen is used as a means of instructing your television what external equipment is
being connected to your TV's scart, S-VHS and/or phono sockets. If you have any equipment connected
to your TV (either permanently, like a VCR, or temporary, like a camcorder) it is important your TV knows
which kind of equipment is connected and so you must switch the relevant AV VCR mode to ON for all
VCR's (in the case of having S-VHS or Hi8 equipment, AV1 SAV MODE must be set to the appropriate
setting - it is recommended that this setting is AUTO). For example, if you have a VCR connected to your
scart socket AV1 then 'AV1 VCR Mode' should be placed ON, but if you have any other equipment
1
Press the cursor down button to select
2
3
Press the cursor down button to select
4
5
Use the up/down cursor keys to select AV
6
Adjust chosen AV by using the left/right
7
8
Note: In order to record digital programs, a scart lead should be fitted between your TV
32
Press and hold the MENU button for 5
seconds. The INSTALL option in the
MAIN MENU appears.
INSTALL.
Once highlighted, accept selection.
AV SETUP.
Once highlighted, accept selection.
to adjust.
cursor buttons.
Once highlighted, accept selection.
connected, it must be set to 'OFF'.
and VCR (see page 7).
Werbung
Inhaltsverzeichnis
