Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
camcorder
Connecting a camcorder
to your TV is easy. First, identify
the type of camcorder and its
connecting sockets. If it is a
standard 8mm type camera then
this is likely to have 'RCA' type
sockets. If you have a S-VHS or
Hi8 camera you may have a S-
VHS socket. Open the front
control panel door and connect
your equipment as detailed here.
Switch your TV on and press the
TV/AV button
on your
handset until AV3 is displayed on
your TV screen. Now begin
playback operation of your
equipment. Alternatively, you
could allocate an individual
channel number for your
camcorder equipment - see
signal source entry on
page 20.
Before connecting external
equipment, please consult
AV setup on page 32.
headphone connection
To use headphones with
your TV insert the headphone
jack plug (3.5mm) into the
corresponding socket.
(see sound mode on page 27)
S-VHS socket
Use this socket with an
S-VHS or Hi8 camera to view
your recordings.
connecting to the mains socket
Important - If you have not already done so, please read television safety on
page 4 before connecting your television and external equipment.
If digital video broadcasting equipment, computer equipment or video games are to be
connected to this TV, use the AV2 located on the rear of your TV for RGB input.
PLEASE NOTE: Prolonged use of computer equipment or games on this TV may cause permanent
damage to your picture tube. To avoid such damage, reduce the brightness and contrast to an
acceptable level and limit the duration of use of computer equipment.
audio 'in' right
Use this socket, along with
audio in left to obtain sound from
your external equipment through
your TV's speakers.
audio 'in' left
Use this socket, along with
audio in right to obtain sound
from your external equipment
through your TV's speakers.
video 'in'
Use this in conjunction
with a standard 8mm camera to
see the picture from your
equipment.
9
Werbung
Inhaltsverzeichnis
