Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It
would also be easier, and more organised, if the external equipment connected also had its own
program number. Signal Source entry allows us to tell the allocated program what
equipment is connected to which socket. This would make the switching between normal TV
4. give this channel the correct AV signal source (in this case AV2 - option 2, page 26)
1
Press the cursor down button to select
2
3
Press the cursor down button to select
4
5
6
change the signal source and you will see
7
the selection bar turn red - it is ready to be
Select your method of signal source entry
8
NOTE: To ensure that analogue events are recorded when placing your TV in
analogue mode it is necessary to place your TV in an 'active' standby mode.
This is done by pressing the standby button followed within a second by
pressing the AV button. This ensures that the digital circuitry your analogue
20
operation and the use of connected equipment much smoother.
For example, if you want to connect a games machine to your TV -
1. connect to socket AV2 via a scart lead (see page 11)
2. give your games machine an empty channel number of its own
3. if desired change this channel name (see page 17)
Press and hold the MENU button for 5
seconds. The INSTALL option in the
MAIN MENU appears.
INSTALL.
Once highlighted, accept selection.
MANUAL SETUP.
Once highlighted, accept selection.
Use the cursor keys to move the
selection bar over the AV required
to be adjusted.
Once highlighted, accept the selection to
changed.
using the up/down cursor buttons.
signal passes through is 'awake', enabling you to record.
then
Werbung
Inhaltsverzeichnis
