Hitachi CL32W30TAN Wartungshandbuch Seite 316

It is advisable to organise your viewing channels at this point - Signal Source Entry
Press and hold the MENU button for 5
1
Press the cursor down button to select
2
3
Press the cursor down button to select
4
5
Select your first program to swap by
6
up/down cursor buttons over a channels
Once number has been selected press the
7
OK button. The selection bar wil then turn
Now select your second program to
swap. Move the red selection bar using
8
Once this has been done, accept selection
9
and the two chosen programs will swap
To return to normal TV operation press the
10
18
on page 20 allows you to give individual channels their own signal source for external
equipment connection such as camcorders, games machines etc.
seconds. The INSTALL option in the
MAIN MENU appears.
INSTALL.
Once highlighted, accept selection.
MANUAL SETUP.
Once highlighted, accept selection.
moving the selection bar using the
PR number.
red - it is ready to be swapped.
the up/down cursor buttons of the
program to be swapped.
position - repeat if necessary.
television button on your handset.