Herunterladen Inhalt Inhalt Diese Seite drucken

Hitachi CL32W30TAN Wartungshandbuch Seite 347

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

questions
Why won't my TV switch on?
Why doesn't my remote control handset work?
problem
analogue...snowy picture/poor sound
digital.........no picture or picture 'jerks'
analogue...multiple images - sound O.K
analogue...intermittent interference
(on digital this may appear as
certain parts of the screen
'freezing')
no picture or sound
If a problem still continues after referring to this guide contact your dealer immediately.
Under NO circumstances remove the rear cover of your TV.
answers
Check that your plug is connected to the socket
and switched on,check fuse and make sure TV
is not in standby mode (see below)
Make sure there are no obstructions between
the handset and the TV's infra-red lens, or the
batteries may be exhausted - replace whole set.
possible reason
Connection of aerial lead
to the TV is poor.
Corroded or poor aerial
connections.
Aerial has moved position.
Adverse weather conditions.
Transmitter problems.
Aerial has moved position.
TV not tuned correctly.
Adverse weather conditions.
Transmitter problems.
AV Input not set correctly.
Magnetic interference from
electrical or mechanical
motors, fluorescent lights,
portable radios etc.
TV may be in AV mode.
Picture/sound controls set to
minimum.
TV in standby mode.
remedy
Make new connection
and/or change aerial plug.
Make new connections
or renew lead.
Re-align aerial.
None.
Check with local Operator.
Re-align aerial.
Re-tune or fine tune TV.
None.
Check with local Operator.
Check what external
equipment is connected
and check its scart AV
status (see page 32)
Check devices for shielding
and renew if necessary or
move further from TV.
Press television button
or
to
buttons on
handset to return to
normal TV mode.
Check picture/sound
controls (go to MAIN
MENU).
press one of the
buttons
to
.
49

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis