Hitachi CL32W30TAN Wartungshandbuch Seite 377

Press and hold the MENU button for 5
1
seconds. The INSTALL option in the
MAIN MENU appears.
Press the cursor down button to select
2
3
Once highlighted, accept selection.
Press the cursor down button to select
4
MANUAL SETUP.
5
Once highlighted, accept selection.
Use the cursor keys to move the
6
selection bar over the NAME
required to be adjusted.
Once highlighted, accept the selection to
change the name and you will see the selection bar
turn red and the chosen character will flash on
and off - it is ready to be changed.
7
Note: Pressing the '0'
button will clear all the characters of the
chosen name.
You can input up to 5 characters
8
- to change each character use the
up/down cursor buttons.
To move from character to character
9
use the right/left cursor buttons.
Once the new NAME has been chosen and
10
entered, confirm your entry to be stored
and repeat if necessary.
To return to normal TV operation press the
11
television button on your handset.
INSTALL.
23