Connecting To The Mains Socket - Hitachi CL32W30TAN Wartungshandbuch

satellite and VCR installation
1
Note: The digital 'link lead'
is the piece of equipment
with two 'blocks' near the
end.
Connect aerial (RF) lead to digital 'in'
1
marked
Connect aerial (RF) 'link lead' to
2
satellite RF 'in'.
Connect VCR 'out' to TV 'in'
4
marked
*
A scart lead should be fitted between your TV and VCR to enhance your picture and sound
quality. They are also rquired to record digital programs. Scart leads are essential if
you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These
leads can be purchased from your Hitachi dealer or any good High Street electrical
Super-VHS video equipment should be connected to the AV1 scart socket located at the
rear of your TV. A dedicated program number may be assigned to AV1, allowing you
easier access to view external equipment broadcasts. How to assign an AV signal to
dedicated program numbers is explained on pages 20 and 21.

connecting to the mains socket

Important - If you have not already done so, please read television safety on
page 4 before connecting your television and external equipment.
insert plug...
RF OUT
SERIAL PORT
C.1
LINE
C.2
AV2
4
3
2
2 X 12W 8
S C
L
R
AV1 AUDIO LINE OUT
5
Video Cassette Recorder
satellite decoder
Connect satellite 'out' to
3
VCR RF 'in'.
5
Scart leads are an optional extra
...and switch on
*
7