Pn.timeoutfthresh - Kollmorgen AKD PROFINET RT Handbuch

AKD PROFINET | 6 PN Parameters

6.3 PN.TIMEOUTFTHRESH

General Information
Type
Description Reads the Timeout Fault Threshold for the Profinet
Units
Range
Default
Value
Data Type Integer
Start Ver-
sion
Variants Supported
Variant
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus
Profinet
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus
Description
Reads the timeout fault threshold for the Profinet Communication Lost Fault (F702). This is
the time that is assigned to the drive via the Profinet master. To change the value, set the
"watchdog time" or "watchdog factor" through the master. Be advised that setting a high
timeout value can lead to the drive not recognizing a lost connection.
62 Kollmorgen | kdn.kollmorgen.com | März 2017
R/O Parameter
Communication Lost Fault (F702)
N/A
N/A
N/A
M_01-13-11-000
Address Attributes Signed?
3022
2860 No
Supported
No
No
No
No
No
No
No
Yes
No
No
No
DWord No
32 Bit No M_01-13-11-000