Bosch BSA 250 Betriebsanleitung Seite 54

18. List of equipment supplied
1 compact roller set, consisting of:
– plastic-coated rollers, mounted in galvanised steel frame,
ready for installation
– sensing rollers for automatic operation, slip monitoring and
blocked brake cut-off during start-up
– cover plate for roller drive units (centre cover plate)
– all connecting cables from roller set to control and display unit,
15 m in length.
1 control and display unit, consisting of:
– integrated computer
– automatic switching unit
– 2 separate brake force indicators
– indicator light for automatic mode.
19. Special accessories
Designation
Support column
Turntable for support column
Wall bracket for control cabinet
Upgrade kit, brake difference light
Upgrade kit, remote control
Upgrade kit, printer interface
Printer cable (1,5 m)
Printer cable (5 m)
Colour printer PDR 211
Shelf for printer
Printer PDR 213 (black ink)
Upgrade kit, pedal dynamometer
Upgrade kit, control cabinet heater
Upgrade kit, uncontrolled clockwise/
anti-clockwise rotation
Upgrade kit, serial interface
Upgrade kit, soft start-up
Cover plates for rollers, hinged
54
20.
See Installation instructions IA4-WEF 317/1
Order no. 1 689 978 307
If the test bench is installed outdoors, the control and display unit
must be adequately protected from the elements. The test area
should be roofed over. The provision of walls along the sides to
an adequate height is also recommended.
Order number
1 688 020 131
1 688 000 310
1 688 005 186
1 687 001 407
A heating element is available as a special accessory (Order no.
1 687 001 406
1 687 001 367) to prevent condensation from forming inside the
1 687 001 405
control and display unit.
1 684 465 309
1 684 465 473
! The installation of this brake system analyser over a
0 684 412 211
normal inspection pit is not permitted as the roller
1 685 438 120
set is mounted in a single undivided frame.
1 687 023 210
1 687 022 493
The distance between roller set and the inspection pit must be
1 687 001 367
2.5 m at least.
1 687 001 436
1 687 001 437
21.
1 687 001 463
1 685 519 861
No modifications are permitted to our products. Furthermore,
only original accessories should be used.
Failure to comply will render the warranty invalid.
22.
The test bench is a Class A product according to EN 55022.
The test bench is capable of drawing currents > 16 A.
Under unfavourable conditions it is possible that interference will
occur due to electrostatic discharge.
Installation and commissioning
Attention must be drawn to the brake system
analyser by a warning light and a relevant
sign, or a barrier may be appropriate.
Protruding cover plates and the edges of the
pit in which the roller set is installed should be
painted in warning colours (DIN 4 844).
All electrical components must be protected
from dampness and other forms of moisture.
Danger to life!
Electric shock hazard!
Warranty
Information concerning
electromagnetic compatibility (EMC)
22.01.03 1 689 979 689