Target Group; Intended Use; Technical Description - Dometic Buttner POWER & CONTROL MT ICC Montage- Und Bedienungsanleitung

Target group

The electrical installation and setup of
the device must be performed by a qual-
ified electrician who has demonstrated
skill and knowledge related to the con-
struction and operation of electrical
equipment and installations, and who is
familiar with the applicable regulations
of the country in which the equipment is
to be installed and/or used, and has
received safety training to identify and
avoid the hazards involved.
All other actions are intended also for non-profes-
sional users.

Intended use

The inverter charger combination is intended to
convert the house battery voltage (12 V DC) into a
pure sinusoidal 230 V alternating voltage (AC) for
operation and stable power supply of connected
230 V consumers. In addition, when connected to
the mains, the device can be used to charge the
house battery or to support weak AC input sources
with additional energy (AC input current boost).
The inverter charger combination is suitable to
charge the following battery types:
• Lead acid batteries
• Lead gel batteries
• Absorbed glass mat (AGM) batteries
• LiFePO4 batteries
The inverter charger combination is not suitable to
charge other types of batteries (e.g. NiCd, NiMH,
etc.).
The inverter charger combination is suitable for:
• Installation in recreational vehicles (RV)
• Stationary or mobile use
• Indoor use
The inverter charger combination is not suitable
for:
• Outdoor use
16
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Dometic reserves the right to change product
appearance and product specifications.

Technical description

General description
The inverter charger combination is a combination
of a DC-to-AC sine wave inverter with an inte-
grated battery charger.
If 230 V mains is available, this external power
source can be used both to supply the sockets in
the recreational vehicle and for charging the vehi-
cle battery.
If no 230 V mains is available, the inverter converts
the battery's direct current into alternating current,
thus ensuring the power supply for the connected
consumers.
The inverter charger combination offers the follow-
ing functions:
• Automatic mains priority switching: Allows to
supply the AC sockets from different voltage
sources. If no 230 V mains is available, the
inverter can take over the supply of the sockets.
When 230 V mains are connected, the device
synchronizes and the AC sockets are then sup-
plied by the mains.
4445103626
EN