Scope of delivery
A
NOTICE!
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation. The inverter produces dissipated heat which
has to be diverted.
• Do not connect the 230 V output of the inverter (fig. 5 7, page 4) to
a different 230 V source.
3
Scope of delivery
No. in
fig. 1,
Designation
page 3
1
Sine wave inverter
2
Connection cable with safety coupling
(for 230 Vw output)
3
Connection cable with safety plug
(for 230 Vw supply)
–
Operating manual
4
Accessories
Designation
Remote control MCR7
Remote control MCR9
5
Target group for this manual
The electrical installation (chapter "Connecting the inverter" on page 17) is intended
for professionals who are familiar with the applicable regulations of the country in
which the equipment is to be installed and/or used.
All other chapters are intended for the users.
12
Ref. no.
9600000090
9600000091
SinePower
EN