Description Of The Device - Dometic Buttner POWER & CONTROL MT ICC Montage- Und Bedienungsanleitung

Wechselrichter/ladegerät kombination

Inhaltsverzeichnis

Verfügbare Sprachen

• AC input current boost: Temporary support of

weak AC input sources with additional energy

from the house battery when high starting cur-

rents are needed (e.g. air conditioner) or the

connected load requires more power than is

available from the mains or a 230 V generator

• Mains input current limitation: Limitation of the

230 V mains input to a maximum available cur-

rent

• Power factor corrected mains input: Optimizing

energy efficiency and providing the maximum

possible charging current of the AC power

source with connected loads

• Microprocessor-controlled, temperature-com-

pensated IU0U charging programs for various

battery types

• Integrated load detection: Automatic standby of

the inverter in case of prolonged non-use (after

10 minutes)

• Automatic shutdown: Avoiding unnecessary

power consumption, the device automatically

switches off when no mains is available

The inverter charger combination has the follow-

ing protective mechanisms:

• High battery voltage shutdown

• Low battery voltage shutdown

• Low input voltage protection

• High input current protection

• High temperature shutdown

• Low temperature protection (only LiFePO4 bat-

teries)

• Protection against short circuit

• High ripple protection

The inverter charger combination can be adapted

to different battery types via DIP switches (see

chapter "Setting the charging program" on

page 23).

The temperature sensor monitors the battery tem-

perature during the charging process.

The inverter charger combination is equipped with

a remote control.