2.
Safety
2.1
Safety Notes
Suitable protective clothing and protective glasses must be worn when carrying out
maintenance and repair work on parts that come into contact with detergent and disinfectant
because of the danger of burns.
The power supply to the crate washer must be cut off before carrying out any repair work.
2.2
Emphasized Text
Text emphasized in this manual (CAUTION, WARNING, IMPORTANT, and NOTE) has the
following meaning:
Used if inaccurately following or noncompliance with operating instructions, work
CAUTION
instructions, specified work processes and procedures, etc. may result in injuries or
accidents.
Used if inaccurately following or noncompliance with operating instructions, work
WARNING
instructions, specified work processes and procedures, etc. may result in damage to the
equipment.
IMPORTANT
NOTE
Used to point out a special feature or peculiarity of the equipment.
2.3
Special Safety Information Concerning Maintenance and Repair Work
Always rinse the metering head, depressurize the pressure line, and wear protective gear
(goggles, gloves, and apron) before carrying out repair or maintenance and before metering
hazardous media.
Electrical repairs must be carried out by electrician or similar experts (safety rules of the
CAUTION
government safety organization VB G 4 and ZH 1/11).
Opening covers or removing parts , even if possible without tools, may expose hot wires.
Connecting points may also carry an electrical current.
IMPORTANT
417101386_AquantaControl_II.doc
Used when special care must be taken when handling or working with the equipment.
Only original spare and replacement parts may be used for repairs.
- 53 -
Rev. 4-2/10