Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Safety
CAUTION
Safety notes and highlights must always be observed!
ATTENTION
2.1
Indications
The highlight symbols shown here have the following meanings:
means that failure to observe operating instructions, working instructions, required
WARNING
work sequences etc., or failure to observe these correctly, may cause injuries or
accidents.
means that failure to observe operating instructions, working instructions, required
CAUTION
work sequences etc., or failure to observe them correctly, may lead to damage to
equipment.
IMPORTANT
Used when particular care must be exercised when handling the equipment.
NOTE
is used to draw a specific point to the reader's attention.
Numberings introduced by the symbol () describe activities to be carried out by the
technician or user.
2.2
Safety Information
The
DryExx® metering stations
descriped in chapter
Connection, adjustment, maintenance and repair tasks must only be carried out by
qualified personnel, with equipment switched of and de-pressurised.
2.3
Special Safety Instructions
The
DryExx Basic
Hz. The safety guidelines on the handling of electrical equipment are to be followed for
maintenance and repair work.
2.4
Special safety notes for maintenance and repair work
The power supply must be interrupted before all maintenance and repair work
(disconnect the mains plug!) Electrical repairs may only be carried out by electricians!
Always rinse the pump's metering head, depressurise the pressure pipe and don
protective clothing (safety goggles, safety gloves and apron) before any maintenance
and repair work and before metering dangerous media.
When conducting maintenance and repair work on parts that come into contact with
WARNING
conveyor belt lubricants, as well as when changing the storage drum, the safety
guidelines on handling chemicals (see the safety data sheet for the applicable
chemicals) must be followed.
Live parts may be uncovered when opening covers or removing parts
(with the exception of covers that can be opened or parts that can be removed without
using tools).
IMPORTANT
Only original spare parts are used for repairs!
417101633_DryExx_Basic
must only be used in conjunction with control units as
4.5
"Overview: System Control for
®
control systems may be used on 120-500 V alternating voltage 50/60
- 24 -
®
DryExx
Systems".
Rev.: 6-02-15
Werbung
Inhaltsverzeichnis
