Operating Level; Key Functions; Display When Switching On The Unit - ECOLAB AQUANTA CONTROL II Bedienungsanleitung

4.

Operating Level

At the operating level, you can:
• activate the booster function (= temporarily increase the concentration).
• switch from summer to winter time.
• quick vent the rinse aid metering pump.
• switch off the instrument.
From the operating level, you can enter the code to switch the instrument into the service,
parameterization and configuration level.
4.1

Key Functions

Fig. 4.1
Activation of access code menu:
Display of uncompensated cond-ductivity value with
key pressed (with
ue);Selection of access code digit
Increase value of access code;
Activate the booster function
Decrease value of access code. Deactivate the
booster function
Put clock forward one hour.
Put clock back one hour.
Activate the quick venting function for the rinse aid
pump.
Switch off unit. Press any key to restart the unit.
4.2

Display when switching on the unit

Fig. 4.2
417101386_AquantaControl_II.doc
operating level
after the conductivity val-
When the unit is switched on, the unit version (fig. 4.2,
pos. 1) and software version (fig. 4.2, pos. 2) are
displayed for approx. 2 seconds.
Pos. Key Description
1 NEXT-key
2 Upper-key
3 Down-key
4 ENTER-key
service, parameterization and
key(s)
Call up menu.
1
Return to initial level
Call up menu.
4 Scroll within a menu.
Move the cursor.
2
Increase the value within a menu.
at least 5 sec.
3
Decrease the value within a menu.
at least 5 sec.
2 & 4 (press both)
at least 5 sec.
3 & 4 (press both)
at least 5 sec.
2 & 3 (press both)
at least 5 sec.
2, 3 & 4 (press both)
at least 5 sec.
- 59 -
configuration level
Rev. 4-2/10