Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Safety
CAUTION
Safety notes and emphasized texts have to be observed in either case!
WARNING
2.1
General
All connection, adjustment, maintenance and repair procedures must be carried out only
by qualified professional personnel, with the device switched off (disconnect the mains
plug!) and not under pressure.
2.2
Indications
The emphases indicated in this maintenance guide have the following meanings:
means that failure to observe operating instructions, working instructions, required
WARNING
work sequences etc., or failure to observe these correctly, may cause injuries or
accidents.
means that failure to observe operating instructions, working instructions, required
CAUTION
work sequences etc., or failure to observe them correctly, may lead to damage to
equipment.
IMPORTANT
Used when particular care must be exercised when handling the equipment.
NOTE
is used to draw a specific point to the reader's attention.
2.3
Safety Information
The
DryExx® metering stations
descriped in chapter
Connection, adjustment, maintenance and repair tasks must only be carried out by
qualified personnel, with equipment switched of and de-pressurised.
When any maintenance and repair tasks are carried out on parts that are in contact with
®
the
DryExx
conveyor belt lubrication and cleaning material, or when changing the
hopper reservoir, safety regulations for the handling of chemical substances must be
observed.
2.4
Special Safety Instructions
The
DryExx-Advanced AB
voltage 50/60 Hz. The safety guidelines on the handling of electrical equipment are to be
followed for maintenance and repair work.
417102248_DryExx_Advanced_AB
must only be used in conjunction with control units as
4.5
"Overview: System Control for
®
control systems may be used on 120-500 V alternating
- 27 -
®
DryExx
Systems".
Rev.: 2-01.15
Werbung
Inhaltsverzeichnis
