System/Process Error Messages; Process Errors Without Messages; Spare Parts - Endress+Hauser iTEMP TMT 165 FOUNDATION Fieldbus Betriebsanleitung

FOUNDATION Fieldbus temperature transmitter
3
Endress+Hauser
Other errors (without error message)
Some other error has
occurred
9.2

System/process error messages

Caution!
In the event of a serious fault, a temperature field transmitter might have to be returned
to the manufacturer for repair. In such cases the procedures on page 84 must be carried
out before you return the unit to Endress+Hauser.
In the TMT 165 system/process errors are recognised and reported in the Transducer
Block.
Such errors are displayed via the following parameters specified in the FOUNDATION
Fieldbus specification:
• BLOCK_ERR
9.3

Process errors without messages

Symptom
The fault cannot be rectified,
or some other fault not
described above has
arisen.
In these instances, please
contact your E+H service
organisation.
9.4

Spare parts

Chapter 9.1 contains a detailed troubleshooting guide. The measuring device,
moreover, provides additional support in the form of continuous self-diagnosis and
displayed error messages.
Diagnosis and rectification → page 103
Rectification
The following options are available for tackling problems of this nature:
Request the services of an E+H service technician
If you contact our service organization to have a service technician sent
out, please be ready to quote the following information:
– Brief description of the fault
– Nameplate specifications (page 85):
Ordering code and serial number
Replace transmitter electronics
Measuring electronics parts defective → order spare parts
9 Troubleshooting
103