Endress+Hauser iTEMP TMT 165 FOUNDATION Fieldbus Betriebsanleitung Seite 142

11 Appendix
Index Parameter
45 ALARM_SUM
4 ALERT_KEY
25 BAL_TIME
142
PID Function Block (PID controller)
Write access with
operating mode
(MODE_BLK)
ROUT - RCAS - CAS - Displays the current status of the process alarms.
AUTO -
MAN - OOS Display:
HI_HI_ALM
HI_ALM
LO_LO_ALM
LO_ALM
DV_HI_ALM
DV_LO_ALM
BLOCK ALM
2
In addition the process alarms can also be disabled in this parameter group.
ROUT - RCAS - CAS - For entry of the indentification number of the plant unit.
AUTO - This information can be used by the fieldbus host system for sorting alarms
MAN - OOS and events.
User input:
Factory default:
ROUT - RCAS - CAS - This parameter is used to enter the time for which the weighting factor
AUTO - counteracts the integral term of the saturation (calculated actuating variable
MAN - OOS > OUT_HI_LIM).
Factory default:
FOUNDATION Fieldbus temperature transmitter
Description
Violation of the upper limit value alarm
Violation of the upper limit value pre alarm
Violation of the lower limit value alarm
Violation of the lower limit value pre alarm
Violation of the limit value alarm for the upper
control deviation
Violation of the limit value alarm for the lower
control deviation
Block alarm
Note!
1...255
0
0 s
Endress+Hauser