Endress+Hauser iTEMP TMT 165 FOUNDATION Fieldbus Betriebsanleitung Seite 115

FOUNDATION Fieldbus temperature transmitter
Index Parameter
17 FEATURES
19 FEATURES_SEL
25 FREE_TIME
24 FREE_SPACE
14 GRANT_DENY
15 HARD_TYPES
32 LIM_NOTIFY
10 MANUFAC_ID
31 MAX_NOTIFY
22 MEMORY_SIZE
21 MIN_CYCLE_T
Endress+Hauser
Resource Block
Write access with
operating mode
(MODE_BLK)
Static/read only Displays the additional options supported by the device.
Display:
Static Selects the additiomnal options supported by the device.
Read only Displays the free system time (in percent) available for execution of further
function blocks.
2
Since the function blocks of the TMT 165 FF are permanently configured, this
parameter always displays the value 0.
Dynamic/read only Displays the free system memory (in percent) available for execution of
further function blocks.
2
Since the function blocks of the TMT 165 FF are permanently configured, this
parameter always displays the value 0.
Dynamic Releases or restricts the access authorisation of a fieldbus host system on
the field device..
Static/read only Displays the input signal type for the Analogue Input function block.
Static This parameter is used to specify the number of event reports that can exist
unconfirmed at the same time.
Selection:
Factory default:
Static/read only Displays the manufacturer's ID number.
Display:
Static/read only Displays the maximum number of event reports supported by the device that
can exist unconfirmed at the same time.
Display:
Static/read only Displays the available configuration memory in kilobytes.
2
This parameter is not supported.
Static/read only Displays the minimum execution time
Description
REPORTS
FAULTSTATE
SOFT W LOCK
Note!
Note!
0 to 3
0
0 x 452B48 = Endress+Hauser
3
Note!
11 Appendix
115