Bosch BSA 4 Serie Benutzerhinweise Seite 27

3.15 Maintenance hazards
Electrical hazards during maintenance!
Opening the brake tester or test lane and im-
proper maintenance can lead to injury!
Safety measure:
¶
Observe the mandatory maintenance intervals or
those specified in the product description or opera-
ting instructions.
¶
Brake testers and test lanes may only be maintained
by trained customer service personnel.
¶
Before maintenance, switch off the brake tester or
test lane and secure it to prevent it from being swit-
ched on inadvertently.
¶
Do not perform maintenance work during operation.
¶
When working on the electrical equipment, observe
the safety instructions.
¶
Do not attempt to perform maintenance work your-
self.
¶
Take effective precautions when overriding safety
measures.
¶
If bolts have been loosened, use the specified tighte-
ning torque to re-tighten them.
¶
After maintenance, install and check the safety
device.
¶
The unit may only be switched on with the safety
device fully installed.
Robert Bosch GmbH
Safety instructions | Brake Test Equipment | 27
3.16 Hazards during repair work
Electrical and mechanical hazards during
repair work!
Opening the brake tester or test lane and im-
proper repair work can lead to injury!
Incorrect or faulty spare parts are a safety
risk. The failure of safety-critical parts of the
brake tester or test lane may be fatal.
Safety measure:
¶
Brake testers and test lanes may only be repaired by
trained customer service personnel.
¶
Before performing repairs, switch off the brake tes-
ter or test lane and secure it to prevent it from being
switched on inadvertently.
¶
When working on the electrical equipment, observe
the safety instructions.
¶
Always use original spare parts.
¶
Do not attempt repairs yourself.
¶
Robert Bosch GmbH cannot accept liability for modifi-
cations made by the user and the resulting damage.
¶
Take effective precautions when overriding safety
measures.
¶
If bolts have been loosened, use the specified tighte-
ning torque to re-tighten them.
¶
After the repairs, install and check the safety device.
¶
The unit may only be switched on with the safety
device fully installed.
en
|
1 691 696 900 2017-04-28