Checking The Manual Starter; Assembling The Manual Starter - Yamaha F6AMH Wartungshandbuch

MANUAL STARTER

CHECKING THE MANUAL STARTER

1. Check:
Start-in-gear protection lever


Cracks/wear/damage
2. Check:
Drive pawl


Cracks/wear/damage
Drive spring


Damage
3. Check:
Sheave drum


Cracks/wear/damage
4. Check:
Return springs


Damage
5. Check:
Starter wire


Frayed/wear/damage
NOTE:
When replacing the starter wire, cut it to


the specified length and then burn it end
so it will not unravel.
Apply water resistant grease onto the


new starter wire.
Starter wire length:
1,500 mm (59.1 in)

ASSEMBLING THE MANUAL STARTER

1. Install:
Starter spring 1


WARNING
When installing the starter spring onto the
starter case, use care so that the starter
spring does not pop out. To help the spring
stay compressed, wind it from the outside,
one turn each time.
5-6
Replace.

Replace.

Replace.

Replace.

Replace.

Replace.