Meldungen Des Internen Oa-Protokolls - HP ProLiant Gen8 Handbuch

Protokolltyp: LOG_INFO, Fehlertyp: Info
OA Tray firmware upgrade initiated.
OA Tray firmware upgrade succeeded.
OA: Blade [value:bladeNumber] management processor firmware upgrade
initiated.
OA: Blade [value:bladeNumber] management processor firmware upgrade
succeeded.
OA: Fan [value] firmware upgrade initiated.
OA: Fan [value] firmware upgrade succeeded.
OA: Interconnect [value:slotNumber] firmware upgrade initiated.
OA: Interconnect [value:slotNumber] firmware upgrade succeeded.
OA: Interconnect [value] firmware upgrade initiated.
OA: Interconnect [value] firmware upgrade succeeded.
OA: Interconnect module in bay [value:slotNumber] was powered off
OA: Interconnect module in bay [value:slotNumber] was powered on
OA: LCD firmware upgrade initiated.
OA: LCD firmware upgrade succeeded.
OA: Server Blade in bay [value:bladeNumber] has been powered down
OA: Server blade in bay [value:bladeNumber] has been powered on

Meldungen des internen OA-Protokolls

Protokolltyp: LOG_WARNING, Fehlertyp: Info
OA: Internal switch reset required. Rebooting...
Protokolltyp: LOG_CRIT, Fehlertyp: SW
OA: daemon is exiting because of SIGTERM, system will reset.
Protokolltyp: LOG_ERR, Fehlertyp: SW
OA: [value] is not a regular file!
OA: Archive file failed to read.
OA: Archive Header for File [value] failed to write.
OA: Bad Archive Header.
OA: Cannot archive file [value] due to lack of space ([value] vs. [value]
bytes)
OA: Cannot archive file with filepath > [value]: [value]
OA: Cannot open [value]
OA: Cannot open file [value]
OA: Cannot stat file [value]
204 Kapitel 4 HP Onboard Administrator-Fehler DEWW