HP ProLiant Gen8 Handbuch Seite 137

Protokollmeldung: The <drive type> physical hard drive located in bay <bay
number> is not supported <not supported reason>. This drive can be found
in box <box number> which is connected to port <port number> of the array
controller <controller name / slot information>.
<not supported reason>-Werte:
●
"because it is a singled ported drive"
●
"because it is a SATA drive"
●
"because it is smaller than the drive it is replacing"
●
"because it is of an unrecognized type"
●
"because it contains an unsupported RIS configuration"
Meldungs-ID: 24598
Schweregrad: Informativ
Protokollmeldung: Logical drive <logical drive number> of array controller
<controller name / slot information> has encountered a status change from:
Status: <previous status>
to
Status: <current status>
<previous status>- und <current status>-Werte:
●
"OK"
●
"FAILED"
●
"NOT CONFIGURED"
●
"INTERIM RECOVERY MODE"
●
"READY FOR RECOVERY"
●
"RECOVERING"
●
"WRONG PHYSICAL DRIVE REPLACED"
●
"PHYSICAL DRIVE NOT PROPERLY CONNECTED"
●
"HARDWARE IS OVERHEATING"
●
"HARDWARE HAS OVERHEATED"
●
"EXPANDING"
●
"NOT YET AVAILABLE"
●
"QUEUED FOR EXPANSION"
●
"DISABLED DUE TO SCSI ID CONFLICT"
●
"EJECTED"
●
"ERASING"
●
"UNKNOWN"
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 113