HP ProLiant Gen8 Handbuch Seite 307

Unterstützende SNMP-Trap-Daten:
●
sysName
●
cpqHoTrapFlags
●
cpqHoCriticalSoftwareUpdateData
Unterstützende SNMP-Trap-Beschreibung: "[cpqHoCriticalSoftwareUpdateData]"
Ereignis-ID: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Dienstereignis)
Protokollschweregrad: Warnung (2)
Protokollmeldung: The agent is unable to generate traps due to an error during initialization.
Ereignis-ID: cpqhsmsg.dll - 1795 (Hex)0x84350703 (Dienstereignis)
Protokollschweregrad: Warnung (2)
Protokollmeldung: The agent is older than other components. The agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Ereignis-ID: cpqhsmsg.dll - 1796 (Hex)0x84350704 (Dienstereignis)
Protokollschweregrad: Warnung (2)
Protokollmeldung: The %1 Agent is older than other components. The %1 Agent is older than the
other components of the Management Agents. Reinstall all of the Management Agents to correct this
error.
Ereignis-ID: cpqhsmsg.dll - 1800 (Hex)0x84350708 (Dienstereignis)
Protokollschweregrad: Warnung (2)
Protokollmeldung: Unable to read security configuration information. SNMP sets have been disabled.
Ereignis-ID: cpqhsmsg.dll - 1803 (Hex)0xc435070b (Dienstereignis)
Protokollschweregrad: Fehler (3)
Protokollmeldung: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Management Agents or running the Emergency Repair procedure may correct
this error.
Ereignis-ID: cpqhsmsg.dll - 1806 (Hex)0x8435070e (Dienstereignis)
Protokollschweregrad: Warnung (2)
Protokollmeldung: The Foundation SNMP Agent service is not running. The agent has determined
that the Foundation Agents service is not running. Stop the SNMP service and restart the Foundation
Agents service. If the error persists, reinstalling the Management Agents may correct this error.
Ereignis-ID: cpqhsmsg.dll - 1808 (Hex)0x44350710 (Dienstereignis)
Protokollschweregrad: Informativ (1)
Protokollmeldung: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a
missing or invalid configuration. Use the Management Agents control panel to verify the
Asynchronous Management configuration settings. Use the Network control panel to verify the
Remote Access configuration. If this error persists, reinstalling the Management Agents or the
Remote Access Service may correct this error. For more information, see the Management Agents
Asynchronous Management documentation.
DEWW Fundament-Agents 283