HP ProLiant Gen8 Handbuch Seite 8

Controller State: A logical drive is configured with a newer version of the
Array Configuration tools than is currently running. .......................................... 27
Controller State: The HBA does not have an access ID... ................................ 27
Drive Offline due to Erase Operation: The logical drive is offline from
having an erase in progress. ............................................................................. 27
Drive Offline due to Erase Operation: The physical drive is currently
queued for erase. .............................................................................................. 27
Drive Offline due to Erase Operation: The physical drive is offline and
currently being erased. ...................................................................................... 27
Drive Offline due to Erase Operation: The physical drive is offline and the
erase process has been failed... ....................................................................... 28
Drive Offline due to Erase Operation: The physical drive is offline and the
erase process has completed... ........................................................................ 28
Drive Offline due to Erase Operation: The physical drive is offline from
having an erase in progress. ............................................................................. 28
Failed Array Controller: code:<Nachschlage-Code> : Restart the server
and run a diagnostic report... ............................................................................ 28
Logical drive state: A logical drive is configured with a newer version of
Storage/Config Mod than is currently running. .................................................. 28
Logical drive state: Background parity initialization is currently queued... ........ 28
Logical drive state: The current array controller is performing capacity
expansion,... ...................................................................................................... 28
Logical drive state: The logical drive is disabled from a SCSI ID conflict. ......... 28
Logical drive state: The logical drive is not configured. ..................................... 29
Logical drive state: The logical drive is not yet available. ................................. 29
Logical drive state: The logical drive is offline from being ejected. ................... 29
Logical drive state: The logical drive is queued for erase. ................................ 29
Logical drive state: The logical drive is queued for expansion. ......................... 29
Logical drive state: The logical drive is queued for rebuilding. .......................... 29
Logical drive state: This logical drive has a high physical drive count... ........... 29
NVRAM Error: Board ID could not be read... .................................................... 29
NVRAM Error: Bootstrap NVRAM image failed checksum test,... .................... 29
NVRAM Error: Bootstrap NVRAM image failed checksum test... ..................... 29
Physical Drive State: The data on the physical drive is being rebuilt. ............... 30
Physical Drive State: Predictive failure. This physical drive is predicted to
fail soon. ............................................................................................................ 30
Physical Drive State: This drive is not supported for configuration... ................ 30
Physical Drive State: SATA-Laufwerke werden für die Konfiguration nicht
unterstützt und sollten von diesem Controller getrennt werden. ....................... 30
Physical Drive State: Single-ported drives are not supported for
configuration and should be disconnected from this controller. ........................ 30
Physical Drive State: This drive contains unsupported configuration data... .... 30
viii DEWW