Betriebs-Protokollmeldungen - HP ProLiant Gen8 Handbuch

OA: KVM Socket creation error [value] ([value]) to ILO addr[value:Address]
OA: Mutex SEMV post failed errno [value]
OA: Mutex SEMV wait failed errno [value]
OA: Screenshot Thread exiting....
Protokolltyp: LOG_ERR, Fehlertyp: Info
OA: KVM ([value:address]) Change ILO setting to enable 'acquire remote
console' failed.
OA: KVM Bay [value:bladeNumber] - Acquired console. Connected to blade.
OA: KVM Bay [value:bladeNumber] - Connecting to blade failed because the
blade is powered off.
OA: KVM Bay [value:bladeNumber] - Connecting to blade.
OA: KVM Bay [value:bladeNumber] - Console in use by another client.
OA: KVM Bay [value:bladeNumber] - Console is in use by another client and
could not be acquired.
OA: KVM Bay [value:bladeNumber] - Console session acquired by [value:OA
user / username] at [value:address]
OA: KVM Bay [value:bladeNumber] - Disconnected from blade due to app exit.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade.
OA: KVM Bay [value:bladeNumber] - Must wait 5 minutes before attempting
to acquire the console.
OA: KVM Bay [value:bladeNumber] - Session acquired by different user.
OA: KVM Blade [value:bladeNumber] console session closed due to ILO
firmware upgrade

Betriebs-Protokollmeldungen

Protokolltyp: LOG_EMERG, Fehlertyp: SW
OA: Internal System Firmware Error. Rebooting.
Protokolltyp: LOG_WARNING, Fehlertyp: SW
FWSync: OA firmware sync failed to create firmware image from the Active
Onboard Administrator
FWSync: OA firmware sync failed to create firmware image from the Standby
Onboard Administrator
FWSync: OA firmware sync of the Active Onboard Administrator failed
FWSync: OA firmware sync of the Standby Onboard Administrator failed
OA: Active Onboard Administrator will not be flashed
OA: Consider resetting the Standby and/or Active Onboard Administrators
and retrying
OA: Failed flashing Standby Onboard Administrator
188 Kapitel 4 HP Onboard Administrator-Fehler DEWW