HP ProLiant Gen8 Handbuch Seite 219
Vorschau ausblenden
Andere Handbücher für ProLiant Gen8:
- Fehlerbeseitigungshandbuch (134 Seiten) ,
- Benutzerhandbuch (101 Seiten) ,
- Bedienungsanleitung (26 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OA: User [value:username] privilege level was changed from
[value:Administrator/Operator/User/Anonymous] to [value:Administrator/
Operator/User/Anonymous] by user [value:username]. All web and CLI
sessions (if any) were ended.
OA: User [value:username] was added by user [value:username].
OA: User [value:username] was assigned to group [value:groupname].
OA: User [value:username] was deleted by user [value:username].
OA: User [value:username] was disabled by user [value:username]. All web
and CLI sessions (if any) were ended.
OA: User [value:username] was enabled by user [value:username].
OA: User [value:username] was removed from group [value:groupname].
OA: User [value:username]'s contact was set removed by user
[value:username].
OA: User [value:username]'s contact was set to [value] by user
[value:username].
OA: User [value:username]'s full name was removed by user
[value:username].
OA: User [value:username]'s full name was set to [value:fullname] by user
[value:username].
OA: VLAN IPCONFIG set to DHCP IP mode and VLAN ID [value] for OA
#[value:number]
OA: VLAN IPCONFIG set to STATIC IP mode and VLAN ID [VALUE] for OA
#[value:number]
OA: VLAN setting has been restored to factory defaults
OA: VLAN setting has been reverted back to saved FLASH config data
OA: VLAN will be reverted to saved config data in [value] secs
OA: Waiting DHCPv4 server response.
Protokolltyp: LOG_INFO, Fehlertyp: SW
OA: ERROR: Event [value] with location [value] sent
Protokolltyp: LOG_INFO, Fehlertyp: Info
OA: Blade #[value:bladeNumber] boot order settings changed by user
[value:username].
OA: Blade #[value:bladeNumber] boot order settings changed by user
[value:username]. First Boot Device: [value]. Boot Agent: [value].
OA: Blade [value:bladeNumber] DVD connection changed by user
[value:username] to '[value:URL]'.
OA: Cold Boot virtual command enacted on blade[value:bladeNumber] by user
[value:username].
OA: Interconnect module [value:number] has been reset by user
[value:username].
DEWW
SysLog-Meldungen 195
Werbung
Kapitel
Fehlerbehebung
