HP ProLiant Gen8 Handbuch Seite 129

Schweregrad: Informativ
Protokollmeldung: An event queue overflow has occurred for the array
controller <controller name / slot information>. At least one event has
been lost. This controller will only queue up to 100 events.
Meldungs-ID: 24580
Schweregrad: Fehler
Protokollmeldung: The HP Smart Array SAS/SATA Event Notification Service needs
to be upgraded and cannot process events at this time. The service is
being stopped and processing of HP Smart Array controller events to the
Windows system event log, ProLiant Integrated Management Log (IML) and
Integrity System Event Log (SEL) will not occur until the software is
updated.
To upgrade your software, please visit http://welcome.hp.com/country/us/
en/support.html?pageDisplay=drivers
Meldungs-ID: 24581
Schweregrad: Informativ
Protokollmeldung: The HP Smart Array SAS/SATA event notification service
<status message>.
<status message>-Werte:
●
"has encountered an error and has stopped"
●
"has stopped due to a message file error"
●
"was not able to update the service control manager with updated status"
●
"cannot open a registry parameter key"
●
"cannot start due to system event logging being disabled"
Meldungs-ID: 24582
Schweregrad: Informativ
Protokollmeldung: A <drive type> physical drive located in bay <bay number>
was <inserted / removed>. The drive can be found in box <box number>
which is attached to port <port number> of array controller <controller
name / slot information>.
Meldungs-ID: 24583
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
detected more than one cable with active drives attached.
Meldungs-ID: 24584
Schweregrad: Warnung
Protokollmeldung: Too many runtime ECC errors have been received from the
array controller <controller name / slot information>. The controller has
restarted without utilizing its DIMM.
Meldungs-ID: 24585
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 105