Flash-Zertifikat Und Konfigurations-Protokollmeldungen - HP ProLiant Gen8 Handbuch

OA_Flash: Flash failed and system is in an unstable state. Do not reboot!
Try to flash again with a new image.
Protokolltyp: LOG_ERR, Fehlertyp: SW
FWSync: Error opening OA firmware sync image.
FWSync: Error opening OA firmware sync image.
FWSync: Invalid flash image.
FWSync: OA firmware sync image is corrupted.
FWSync: OA firmware sync image is older than current firmware.
FWSync: Only one flash instance can run at a time.
FWSync: Only one instance of OA firmware sync can run at a time.
OA_Flash: Downloading flash image failed.
OA_Flash: Error opening [value] for input.
OA_Flash: Firmware image is corrupted or not a valid image. Please verify
the url and try again.
OA_Flash: Firmware version [value:version] is not supported on this
hardware.
OA_Flash: Found core file. Reboot after flash suppressed to allow
developer to debug.
OA_Flash: Invalid flash image.
OA_Flash: Invalid flash image.
OA_Flash: Only one flash instance can run at a time.
OA_Flash: Out of memory while decoding flash image.
OA_Flash: The firmware image provided is older than the current firmware
and OA settings cannot be preserved. The force downgrade option must be
used. Please re-try with the force option to flash and go back to factory
defaults.
Protokolltyp: LOG_NOTICE, Fehlertyp: Info
FWSync: New firmware image flashed.
FWSync: OA firmware sync to [value:version] complete
OA_Flash: Firmware image flashed from [value:version] to [value:version]
Protokolltyp: LOG_INFO, Fehlertyp: Info
OA_Flash: Image verified successfully and applies to this system using
the parameters supplied. Test Mode specified, skipping the actual flash
process Firmware version [value:version] ExitCode=0

Flash-Zertifikat und Konfigurations-Protokollmeldungen

Protokolltyp: LOG_ERR, Fehlertyp: SW
CERTS: .ssh has wrong directory permissions
DEWW SysLog-Meldungen 185