Lcd-Protokollmeldungen - HP ProLiant Gen8 Handbuch

netreg: Couldn't start main ddns thread
netreg: DDNS: Failed to add OA hostname to DDNS server. Server is not
authoritative for the DNS zone
netreg: DDNS: Not implemented
netreg: DDNS: Not in zone
netreg: DDNS: Server failure
netreg: DDNS: Unable to create socket
netreg: DDNS: Update refused by DNS server
netreg: Error starting DDNS thread
netreg: Error starting NetBIOS thread
netreg: NETBIOS: Refreshed WINS registration
Protokolltyp: LOG_NOTICE, Fehlertyp: Info
netreg: DDNS: Registered with Dynamic DNS
netreg: DDNS: Update successful
netreg: NETBIOS: Registered with WINS

LCD-Protokollmeldungen

Protokolltyp: LOG_ERR, Fehlertyp: SW
OA: Blade [value:bladeNumber]: KVM access denied.
OA: Consume SEMV post failed errno [value]
OA: Error creating fifo SAVEPNG_FIFO ". No screenshot thread available"
OA: Error opening fifo SAVEPNG_FIFO ". No screenshot thread available"
OA: KVM Bay [value:bladeNumber] - All HTTP sessions to ILO are full. Wait
a few seconds and try again.
OA: KVM Bay [value:bladeNumber] - Connection to blade failed.
OA: KVM Bay [value:bladeNumber] - Could not connect. Error([value]).
OA: KVM Bay [value:bladeNumber] - Could not connect. If error persists
reboot the OA.
OA: KVM Bay [value:bladeNumber] - Could not create thread.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad getmore
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad next state
detected.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Bad state
transition detected.
OA: KVM Bay [value:bladeNumber] - Disconnected from blade. Exit state
detected.
OA: KVM Socket connect error [value] ([value]) to ILO addr
[value:Address]:[value:port]
DEWW SysLog-Meldungen 187