HP ProLiant Gen8 Handbuch Seite 181

Protokollmeldung: The external Smart Array controller located in the MSA
chassis labeled as <chassis number> is reporting that the <drive type>
physical drive located in bay <bay number> is in a SMART trip state that
indicates the drive has reached 0 percent usage left. Indicates that the
drive has a S.M.A.R.T wear error and is approaching the maximum usage
limit for writes (wear out). The drive should be replaced as soon as
possible.
The external Smart Array controller is attached to the host side Smart
Array controller <controller name / slot information>.
Meldungs-ID=24791
Schweregrad: Fehler
Protokollmeldung: Array controller <controller name / slot information> has
reported that its internal temperature has exceeded the preset limit of
<temperature limit>°C. The current temperature is <current temperature>°C
as reported by sensor number <sensor number>. The controller may attempt
to shut down power and/or spin down installed disk drives.
Meldungs-ID: 24792
Schweregrad: Warnung
Protokollmeldung: Array controller <controller name / slot information> has
reported that its internal temperature is nearing the preset temperature
limit of <temperature limit>°C. The current temperature is <current
temperature>°C as reported by sensor number <sensor number>. The array
controller may enact precautionary measures to prevent data loss should
the temperature reach the operating limit.
Meldungs-ID: 24793
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that a previously existing temperature condition on the
controller from sensor <sensor number> has been corrected. All of the
temperature sensors are now reporting acceptable temperature levels.
Meldungs-ID: 24794
Schweregrad: Fehler
Protokollmeldung: The external Smart Array controller located in the MSA
chassis labeled as <chassis number> is indicating that sensor number
<sensor number> has reported that the internal temperature of <internal
temperature>°C has exceeded the preset temperature limit of <temperature
limit>°C. The external Smart Array controller may attempt to shut down
power to and/or spin down installed disk drives.
The external Smart Array controller is attached to the host side Smart
Array controller <controller name / slot information>.
Meldungs-ID: 24795
Schweregrad: Warnung
Protokollmeldung: The external Smart Array controller located in the MSA
chassis labeled as <chassis label> is indicating that its internal
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 157