HP ProLiant Gen8 Handbuch Seite 141

An excerpt of the controller message is as follows: <message from
firmware>.
Meldungs-ID: 24608
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that storage box number <box number> was added to port <port
number>. This connection is through I/O module number <module number> on
the storage box.
Meldungs-ID: 24609
Schweregrad: Fehler
Protokollmeldung: Array controller <controller name / slot information> has
reported that storage box number <box number> was removed from port <port
number>. This connection was through I/O module number <module number> on
the storage box. This event can occur when either a sole I/O module or
data cable is removed.
Meldungs-ID: 24610
Schweregrad: Warnung
Protokollmeldung: Array controller <controller name / slot information> has
reported that either redundant I/O module number <module number> in box
<box number> was removed or the cable to this module was removed. The
cable and I/O module were connected to port <port number> of the array
controller.
Meldungs-ID: 24611
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that either redundant I/O module number <module number> in box
<box number> was added or the cable to this module was connected. The
cable and I/O module are connected to port <port number> of the array
controller.
Meldungs-ID: 24612
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that box <box number> connected to port <port number> is now
marked as repaired (re-added after a previous failure).
Meldungs-ID: 24613
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that either redundant I/O module number <module number> in box
<box number> was repaired or its' path was repaired. Box <box number> is
connected to port <port number> of the array controller.
Meldungs-ID: 24614
Schweregrad: Informativ
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 117